-- *********************************************************************
-- CISCO-EXT-SCSI-MIB.my: Extension to SCSI MIB
--
-- October 2002, H K Vivek
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************CISCO-EXT-SCSI-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Unsigned32,NOTIFICATION-TYPEFROM SNMPv2-SMI
TimeStamp,TestAndIncr,TruthValue,
RowStatus,TEXTUAL-CONVENTIONFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
ciscoMgmt FROM CISCO-SMI
VsanIndex, DomainId,FcAddressIdFROM CISCO-ST-TC
vsanIndex FROM CISCO-VSAN-MIB
ciscoScsiInstanceEntry,ciscoScsiDscTgtEntry,ciscoScsiDscLunEntry,ScsiIndexValueFROM CISCO-SCSI-MIB;ciscoExtScsiMIB MODULE-IDENTITYLAST-UPDATED"200403140000Z"ORGANIZATION"Cisco Systems Inc."CONTACT-INFO" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"DESCRIPTION"The Cisco extension to CISCO-SCSI-MIB
which is a copy of the Internet draft,
the SCSI-MIB, from the IETF.
Glossary of terms used in this MIB:
VSAN - Virtual Storage Area Network, similar to
a VLAN.
WWN - World Wide Name. Mechanism of identifying
devices in Fibre Channel Networks. It is
8 bytes long.
pWWN - port World Wide Name.
nWWN - node World Wide Name.
LUN - Logical Unit Number is a 64-bit identifier for
a logical unit."REVISION"200403140000Z"DESCRIPTION"Added ciscoExtScsiIntrDiscLunPortId object
to ciscoExtScsiIntrDiscLunsTable.
Changed the DEFVAL of ciscoExtScsiLunDiscOs
object to 'windows' from 'all'.
Added ciscoExtScsiDiscType object."REVISION"200311280000Z"DESCRIPTION"Added ciscoExtScsiLunDiscOs,
ciscoExtScsiLunDiscVsanId,
ciscoExtScsiLunDiscPortId,
ciscoExtScsiLunCacheScsiIndex,
ciscoExtScsiLunCacheDevIndex,
ciscoExtScsiLunCachePortIndex,
ciscoExtScsiLunCacheTgtIndex scalar objects.
Added ciscoExtScsiIntrDiscLunOs object to
ciscoExtScsiIntrDiscLunsTable."REVISION"200301280000Z"DESCRIPTION"Added ciscoExtScsiPartialLunDiscTable to
facilitate partial LUN discovery on a
fabric wide basis."REVISION"200210100000Z"DESCRIPTION"Added ciscoExtScsiNotificationCntl object
and ciscoExtScsiLunDiscDoneNotify
notification."REVISION"200210050000Z"DESCRIPTION"Initial version of this MIB."::={ ciscoMgmt 299}ciscoExtScsiMIBObjects OBJECTIDENTIFIER::={ ciscoExtScsiMIB 1}ciscoExtScsiMIBConformance OBJECTIDENTIFIER::={ ciscoExtScsiMIB 2}ciscoExtScsiConfiguration OBJECTIDENTIFIER::={ ciscoExtScsiMIBObjects 1}ciscoExtScsiNotification OBJECTIDENTIFIER
::={ ciscoExtScsiMIBObjects 2}ciscoExtScsiNotifications OBJECTIDENTIFIER::={ ciscoExtScsiNotification 0}ciscoExtScsiStats OBJECTIDENTIFIER::={ ciscoExtScsiMIBObjects 3}-- Textual ConventionsLunDiscOS ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Represents a set of Operating Systems on which LUN
discovery is to be done."SYNTAXINTEGER{windows(1),aix(2),solaris(3),linux(4),
hpux(5),all(6)}-- Extensions to the ciscoScsiGenInstanceTable
--ciscoExtScsiGenInstanceTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoExtScsiGenInstanceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is an extension to the
ciscoScsiInstanceTable defined in
the CISCO-SCSI-MIB.
The ciscoScsiInstIndex values are
assigned as follows:
1. there is one ciscoScsiInstIndex value
defined per disk group associated with the
system.
2. there is one ciscoScsiInstIndex value
defined per line-card.
3. there is one ciscoScsiInstIndex value
defined for the supervisor as a whole.
All ciscoScsiInstIndex values defined
for type 1 above have a disk group
ID associated with them, which is that
of the corresponding disk group. This
value is present in the corresponding
instance of ciscoExtScsiDiskGrpId object.
The corresponding instance of
ciscoExtScsiLineCardOrSup object will
contain the entity physical index of
the line card to which it is associated.
For ciscoScsiInstIndex values defined
for type 2, the ciscoExtScsiDiskGrpId
object is not meaningful and will be
empty. The corresponding instance of
ciscoExtScsiLineCardOrSup object will
contain the entity physical index value
of that line card.
For the ciscoScsiInstIndex value defined
for type 3, the ciscoExtScsiDiskGrpId
object is not meaningful and will be empty.
The corresponding instance of
ciscoExtScsiLineCardOrSup object will
contain the entity physical index value
of the supervisor."::={ ciscoExtScsiConfiguration 1}ciscoExtScsiGenInstanceEntry OBJECT-TYPESYNTAX CiscoExtScsiGenInstanceEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry contains disk group ID and/or entity
physical index of a disk group/line card/supervisor
depending on the ciscoScsiInstIndex value
assignment as defined above. There is a one-to-one
mapping between an entry here and
ciscoScsiInstanceEntry."AUGMENTS{ ciscoScsiInstanceEntry }::={ ciscoExtScsiGenInstanceTable 1}
CiscoExtScsiGenInstanceEntry ::=SEQUENCE{
ciscoExtScsiDiskGrpId OCTETSTRING,
ciscoExtScsiLineCardOrSup Unsigned32}ciscoExtScsiDiskGrpId OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0 | 64))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains the disk group
ID of a disk group if the
value of the ciscoScsiInstIndex
corresponds to that of a disk
group. Otherwise, this object will
contain a null string."::={ciscoExtScsiGenInstanceEntry 1}
ciscoExtScsiLineCardOrSup OBJECT-TYPESYNTAXUnsigned32(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains the entity
physical index of a line card
if the ciscoScsiInstIndex value
corresponds to that of a disk
group or a line card.
Otherwise, this object contains the
entity physical index value of the
supervisor of the system."::={ ciscoExtScsiGenInstanceEntry 2}ciscoExtScsiLunDiscSpinLock OBJECT-TYPESYNTAXTestAndIncrMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to facilitate triggerring
the LUN/target discovery by multiple managers.
The procedure for triggering LUN/target discovery
is as follows:
1. Retrieve the value of
ciscoExtScsiLunDiscSpinLock and determine the
value for ciscoExtScsiStartLunDisc,
ciscoExtScsiLunDiscOs, ciscoExtScsiLunDiscVsanID,
ciscoExtScsiLunDiscPortId and
ciscoExtScsiDiscType objects.
2. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value, and in the same PDU,
the value of ciscoExtScsiLunDiscOs
to the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go back
to step 1.
3. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 1, and in the same
PDU, the value of ciscoExtScsiLunDiscVsanID to
the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go back
to step 1.
4. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 2, and in the same
PDU, the value of ciscoExtScsiLunDiscPortId to
the determined value. If the set fails for the
ciscoExtScsiLunDiscSpinLock object, go back to
step 1.
5. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 3, and in the same
PDU, the value of ciscoExtScsiDiscType to
the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go
back to step 1.
6. Set the value of ciscoExtScsiLunDiscSpinLock
to the retrieved value plus 4, and in the same
PDU, the value of ciscoExtScsiStartLunDisc to
the determined value. If the set fails for
the ciscoExtScsiLunDiscSpinLock object, go
back to step 1.
Note that if it is possible to include
ciscoExtScsiLunDiscVsanID,
ciscoExtScsiLunDiscPortId, ciscoExtScsiDiscType
and/or ciscoExtScsiStartLunDisc in the
(Set Request) PDU of an earlier step, then steps
3, 4 and/or 5 can be eliminated."::={ ciscoExtScsiConfiguration 2}ciscoExtScsiStartLunDisc OBJECT-TYPESYNTAXINTEGER{startDiscovery(1),startLocalDiscovery(2),startRemoteDiscovery(3),noop(4),
startPartialDiscovery(5),startPortBasedDiscovery(6)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"If this object is set to 'startLocalDiscovery',
then only the directly attached SCSI target
devices/ports and/or LUNs associated with them
on all VSANs will be discovered.
If this object is set to 'startRemoteDiscovery',
then all SCSI target devices/ports and/or LUNs
associated with them on all VSANs in the whole
fabric, except the directly attached ones, will
be discovered.
If this object is set to 'startDiscovery', then
both the above discoveries will be carried out.
If this object is set to 'startPartialDiscovery',
then all SCSI target devices/ports and/or LUNs
associated with them on the domain IDs and VSANs
specified in the ciscoExtScsiPartialLunDiscTable,
will be discovered. If the
ciscoExtScsiPartialLunDiscTable is empty, then
no SCSI target devices/ports will be discovered.
If this object is set to 'startPortBasedDiscovery',
then all LUNs/targets associated with the port
specified by ciscoExtScsiLunDiscPortId object will
be discovered. If the ciscoExtScsiLunDiscPortId
object is not set to a valid value, then no
LUNs/targets will be discovered. The value of
ciscoExtScsiLunDiscVsanId object should be set to
the value of the VSAN on which the port based
discovery is to be carried out.
No action is taken if this object is set
to 'noop'.
The value of this object when read is
always 'noop'.
After a discovery has been triggered, this
object cannot be set again to trigger
another discovery, when the value of
ciscoExtScsiLunDiscStatus is 'inProgress'.
In all the above cases, if the
ciscoExtScsiLunDiscOs object is set to a
particular Operating System, then the discovery
of the LUNs will take place only for that
Operating System."::={ ciscoExtScsiConfiguration 3}ciscoExtScsiLunDiscStatus OBJECT-TYPESYNTAXINTEGER{inProgress(1),
completed(2),failure(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the outcome of the
LUN/target discovery on the local switch.
This object contains the status of the most
recent discovery.
inProgress(1) - indicates that the discovery is
still in progress.
completed(2) - indicates that the discovery is
complete.
failure(3) - indicates that the discovery
encountered a failure."::={ ciscoExtScsiConfiguration 4}ciscoExtScsiLunDiscCompleteTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object contains the value of sysUpTime
when the last discovery was completed.
The value of this object will be zero, if
discovery has not been performed since the
last system restart."::={ ciscoExtScsiConfiguration 5}ciscoExtScsiIntrDiscTgtTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoExtScsiIntrDiscTgtEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is an extension to the
ciscoScsiDscTgtTable."::={ ciscoExtScsiConfiguration 6}ciscoExtScsiIntrDiscTgtEntry OBJECT-TYPESYNTAX CiscoExtScsiIntrDiscTgtEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry (conceptual row) in this table."AUGMENTS{ ciscoScsiDscTgtEntry }::={ ciscoExtScsiIntrDiscTgtTable 1}
CiscoExtScsiIntrDiscTgtEntry ::=SEQUENCE{
ciscoExtScsiIntrDiscTgtVsanId VsanIndex,
ciscoExtScsiIntrDiscTgtDevType Unsigned32,
ciscoExtScsiIntrDiscTgtVendorId OCTETSTRING,
ciscoExtScsiIntrDiscTgtProductId OCTETSTRING,
ciscoExtScsiIntrDiscTgtRevLevel OCTETSTRING,
ciscoExtScsiIntrDiscTgtOtherInfo OCTETSTRING}ciscoExtScsiIntrDiscTgtVsanId OBJECT-TYPESYNTAX VsanIndex
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The VSAN to which this target belongs to."::={ ciscoExtScsiIntrDiscTgtEntry 1}ciscoExtScsiIntrDiscTgtDevType OBJECT-TYPESYNTAXUnsigned32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The device type of the SCSI target."REFERENCE"Section 7.3.2 Standard INQUIRY Data.
SCSI Primary Commands- 2 (SPC-2)"::={ ciscoExtScsiIntrDiscTgtEntry 2}ciscoExtScsiIntrDiscTgtVendorId OBJECT-TYPESYNTAXOCTETSTRING(SIZE(8))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The vendor Id of the SCSI target."REFERENCE"Section 7.3.2 Standard INQUIRY Data.
SCSI Primary Commands- 2 (SPC-2)"::={ ciscoExtScsiIntrDiscTgtEntry 3}ciscoExtScsiIntrDiscTgtProductId OBJECT-TYPESYNTAXOCTETSTRING(SIZE(16))
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The product Id of the SCSI target."REFERENCE"Section 7.3.2 Standard INQUIRY Data.
SCSI Primary Commands- 2 (SPC-2)"::={ ciscoExtScsiIntrDiscTgtEntry 4}ciscoExtScsiIntrDiscTgtRevLevel OBJECT-TYPESYNTAXOCTETSTRING(SIZE(4))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The product revision level of the SCSI target."REFERENCE"Section 7.3.2 Standard INQUIRY Data.
SCSI Primary Commands- 2 (SPC-2)"::={ ciscoExtScsiIntrDiscTgtEntry 5}ciscoExtScsiIntrDiscTgtOtherInfo OBJECT-TYPE
SYNTAXOCTETSTRING(SIZE(8))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bytes from 0 to 7 in the INQUIRY command
response data."REFERENCE"Section 7.3.2 Standard INQUIRY Data.
SCSI Primary Commands- 2 (SPC-2)"::={ ciscoExtScsiIntrDiscTgtEntry 6}ciscoExtScsiIntrDiscLunsTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoExtScsiIntrDiscLunsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is an extension to the
ciscoScsiDscLunTable."::={ ciscoExtScsiConfiguration 7}ciscoExtScsiIntrDiscLunsEntry OBJECT-TYPESYNTAX CiscoExtScsiIntrDiscLunsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry (conceptual row) in this table."AUGMENTS{ ciscoScsiDscLunEntry }::={ ciscoExtScsiIntrDiscLunsTable 1}
CiscoExtScsiIntrDiscLunsEntry ::=SEQUENCE{
ciscoExtScsiIntrDiscLunCapacity Unsigned32,
ciscoExtScsiIntrDiscLunNumber OCTETSTRING,
ciscoExtScsiIntrDiscLunSerialNum OCTETSTRING,
ciscoExtScsiIntrDiscLunOs LunDiscOS,
ciscoExtScsiIntrDiscLunPortId FcAddressId}ciscoExtScsiIntrDiscLunCapacity OBJECT-TYPESYNTAXUnsigned32UNITS"MBytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The capacity of this Lun."::={ ciscoExtScsiIntrDiscLunsEntry 1}ciscoExtScsiIntrDiscLunNumber OBJECT-TYPESYNTAXOCTETSTRING(SIZE(8))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of this LUN."REFERENCE"Section 4.8 (Logical Units) and Section 3.1.63
in SCSI Architecture Model-2 (SAM-2)."::={ ciscoExtScsiIntrDiscLunsEntry 2}ciscoExtScsiIntrDiscLunSerialNum OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The serial number of this LUN."REFERENCE"Section 8.4.6 (Unit Serial Number Page)
in SCSI Primary Commands-2 (SPC-2)."::={ ciscoExtScsiIntrDiscLunsEntry 3}ciscoExtScsiIntrDiscLunOs OBJECT-TYPESYNTAX LunDiscOS
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Operating System for which this LUN was
discovered."::={ ciscoExtScsiIntrDiscLunsEntry 4}ciscoExtScsiIntrDiscLunPortId OBJECT-TYPESYNTAXFcAddressIdMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The port on which this LUN was discovered.
LUNs are present on SCSI target ports. This object
represents the FC-ID (Fibre Channel Identifier) of
the target port on which this LUN was discovered."::={ ciscoExtScsiIntrDiscLunsEntry 5}
-- Notification control objectciscoExtScsiNotificationCntl OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies if the
'ciscoExtScsiLunDiscDoneNotify' notification
should be generated or not.
If the value of this object is 'true', then
the notification is generated when a
discovery is completed.
If the value of this object is 'false', then
the notification is not generated."DEFVAL{ false }::={ ciscoExtScsiConfiguration 8}-- Partial LUN discovery tableciscoExtScsiPartialLunDiscTable OBJECT-TYPESYNTAXSEQUENCEOF CiscoExtScsiPartialLunDiscEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"This table contains a set of domain IDs on VSAN, on
which the fabric-wide LUN/target discovery needs to
be carried out. It is a mechanism to limit the fabric
wide discovery of SCSI targets and LUNs to the
domains and VSANs specified in this table.
If this table is populated with some domain IDs on
some VSANs and a discovery is started by setting
ciscoExtScsiStartLunDisc object to
'startPartialDiscovery', then
discovery of SCSI targets and LUNs is limited only
to those domains on those VSANs."::={ ciscoExtScsiConfiguration 9}ciscoExtScsiPartialLunDiscEntry OBJECT-TYPESYNTAX CiscoExtScsiPartialLunDiscEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry (conceptual row) in this table."INDEX{ vsanIndex, ciscoExtScsiPartialLunDomId }::={ ciscoExtScsiPartialLunDiscTable 1}
CiscoExtScsiPartialLunDiscEntry ::=SEQUENCE{
ciscoExtScsiPartialLunDomId DomainId,
ciscoExtScsiPartialLunRowStatus RowStatus}ciscoExtScsiPartialLunDomId OBJECT-TYPESYNTAX DomainId
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The Domain Id on which the lun discovery needs
to be carried out."::={ ciscoExtScsiPartialLunDiscEntry 1}ciscoExtScsiPartialLunRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The status of this conceptual row."::={ ciscoExtScsiPartialLunDiscEntry 2}ciscoExtScsiLunDiscOs OBJECT-TYPESYNTAX LunDiscOS
MAX-ACCESSread-write
STATUScurrentDESCRIPTION"This object specifies the Operating System on
which the LUNs/targets need to be discovered."DEFVAL{ windows }::={ ciscoExtScsiConfiguration 10}ciscoExtScsiLunDiscVsanId OBJECT-TYPESYNTAX VsanIndex
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the VSAN on which the LUNs/
targets need to be discovered, in the case of
port-based discovery. If a port-based discovery is
not being initiated, then the value of this object
will be ignored."DEFVAL{1}::={ ciscoExtScsiConfiguration 11}ciscoExtScsiLunDiscPortId OBJECT-TYPESYNTAXFcAddressIdMAX-ACCESSread-write
STATUScurrentDESCRIPTION"This object specifies the FCID of the port for
which the LUNs/targets need to be discovered, in
the case of port-based discovery. If a port-based
discovery is not being initiated, then the value
of this object will be ignored and should be set
to all zeros."DEFVAL{ '000000'h }::={ ciscoExtScsiConfiguration 12}ciscoExtScsiLunCacheScsiIndex OBJECT-TYPESYNTAXScsiIndexValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the first index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry."::={ ciscoExtScsiConfiguration 13}
ciscoExtScsiLunCacheDevIndex OBJECT-TYPESYNTAXScsiIndexValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the second index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry."::={ ciscoExtScsiConfiguration 14}ciscoExtScsiLunCachePortIndex OBJECT-TYPESYNTAXScsiIndexValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the third index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry."
::={ ciscoExtScsiConfiguration 15}ciscoExtScsiLunCacheTgtIndex OBJECT-TYPESYNTAXScsiIndexValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the fourth index into the
ciscoExtScsiIntrDiscLunsTable. It is populated
by the agent on the completion of a successful
port based discovery of LUNs. It helps the
management station to directly access the
discovered LUN entry."::={ ciscoExtScsiConfiguration 16}ciscoExtScsiDiscType OBJECT-TYPESYNTAXINTEGER{targets(1),luns(2)}MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"This object specifies the type of discovery
desired.
Setting this object to 'targets(1), results in
only targets being discovered and the
ciscoExtScsiIntrDiscTgtTable being populated
with them. The corresponding LUNs are not
discovered.
Setting this object to 'luns(2)', results in
targets and LUNs being discovered and the
ciscoExtScsiIntrDiscTgtTable and
ciscoExtScsiIntrDiscLunsTable are populated."DEFVAL{ luns }::={ ciscoExtScsiConfiguration 17}-- NotificationciscoExtScsiLunDiscDoneNotify NOTIFICATION-TYPEOBJECTS{ciscoExtScsiLunDiscStatus}STATUScurrentDESCRIPTION"This notification is generated whenever a
Lun discovery cycle is completed."::={ ciscoExtScsiNotifications 1}ciscoExtScsiMIBCompliances OBJECTIDENTIFIER::={ ciscoExtScsiMIBConformance 1}ciscoExtScsiMIBGroups OBJECTIDENTIFIER::={ ciscoExtScsiMIBConformance 2}ciscoExtScsiMIBCompliance MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities that
implement the Cisco extension to the
CISCO-SCSI-MIB."MODULEMANDATORY-GROUPS{ciscoExtScsiConfigGroup,
ciscoExtScsiNotifyControlGroup,
ciscoExtScsiNotifyGroup}::={ ciscoExtScsiMIBCompliances 1}ciscoExtScsiMIBCompliance2 MODULE-COMPLIANCESTATUSdeprecated-- superceded by ciscoExtScsiMIBComplianceRev3DESCRIPTION"The compliance statement for entities that
implement the Cisco extension to the
CISCO-SCSI-MIB."MODULEMANDATORY-GROUPS{ciscoExtScsiConfigGroup,
ciscoExtScsiPartialDiscGroup,
ciscoExtScsiNotifyControlGroup,
ciscoExtScsiNotifyGroup}OBJECT ciscoExtScsiPartialLunRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."::={ ciscoExtScsiMIBCompliances 2}ciscoExtScsiMIBComplianceRev3 MODULE-COMPLIANCESTATUSdeprecated-- superceded by ciscoExtScsiMIBComplianceRev4DESCRIPTION"The compliance statement for entities that
implement the Cisco extension to the
CISCO-SCSI-MIB."MODULEMANDATORY-GROUPS{ciscoExtScsiConfigGroup1,
ciscoExtScsiPartialDiscGroup,
ciscoExtScsiNotifyControlGroup,
ciscoExtScsiNotifyGroup}OBJECT ciscoExtScsiPartialLunRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."::={ ciscoExtScsiMIBCompliances 3}ciscoExtScsiMIBComplianceRev4 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities that
implement the Cisco extension to the
CISCO-SCSI-MIB."MODULEMANDATORY-GROUPS{ciscoExtScsiConfigGroup2,
ciscoExtScsiPartialDiscGroup,
ciscoExtScsiNotifyControlGroup,
ciscoExtScsiNotifyGroup}OBJECT ciscoExtScsiPartialLunRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to be
supported."::={ ciscoExtScsiMIBCompliances 4}-- Units of conformanceciscoExtScsiConfigGroup OBJECT-GROUPOBJECTS{ciscoExtScsiDiskGrpId,
ciscoExtScsiLineCardOrSup,
ciscoExtScsiLunDiscSpinLock,
ciscoExtScsiStartLunDisc,
ciscoExtScsiLunDiscStatus,
ciscoExtScsiLunDiscCompleteTime,
ciscoExtScsiIntrDiscTgtVsanId,
ciscoExtScsiIntrDiscTgtDevType,
ciscoExtScsiIntrDiscTgtVendorId,
ciscoExtScsiIntrDiscTgtProductId,
ciscoExtScsiIntrDiscTgtRevLevel,
ciscoExtScsiIntrDiscTgtOtherInfo,
ciscoExtScsiIntrDiscLunCapacity,
ciscoExtScsiIntrDiscLunNumber,
ciscoExtScsiIntrDiscLunSerialNum}STATUSdeprecatedDESCRIPTION"A collection of objects for displaying and
configuring Cisco extension MIB objects to
the CISCO-SCSI-MIB."::={ ciscoExtScsiMIBGroups 1}ciscoExtScsiNotifyControlGroup OBJECT-GROUPOBJECTS{ciscoExtScsiNotificationCntl}STATUScurrent
DESCRIPTION"A collection of notification control object(s)
for controlling notification generation."::={ ciscoExtScsiMIBGroups 2}ciscoExtScsiNotifyGroup NOTIFICATION-GROUPNOTIFICATIONS{ciscoExtScsiLunDiscDoneNotify}STATUScurrentDESCRIPTION"A collection of notification(s) for monitoring
Lun discovery status."::={ ciscoExtScsiMIBGroups 3}ciscoExtScsiPartialDiscGroup OBJECT-GROUPOBJECTS{ciscoExtScsiPartialLunRowStatus}STATUScurrentDESCRIPTION"A collection of objects for displaying and
configuring partial LUN discovery."::={ ciscoExtScsiMIBGroups 4}ciscoExtScsiConfigGroup1 OBJECT-GROUPOBJECTS{ciscoExtScsiDiskGrpId,
ciscoExtScsiLineCardOrSup,
ciscoExtScsiLunDiscSpinLock,
ciscoExtScsiLunDiscOs,
ciscoExtScsiStartLunDisc,
ciscoExtScsiLunDiscStatus,
ciscoExtScsiLunDiscCompleteTime,
ciscoExtScsiIntrDiscTgtVsanId,
ciscoExtScsiIntrDiscTgtDevType,
ciscoExtScsiIntrDiscTgtVendorId,
ciscoExtScsiIntrDiscTgtProductId,
ciscoExtScsiIntrDiscTgtRevLevel,
ciscoExtScsiIntrDiscTgtOtherInfo,
ciscoExtScsiIntrDiscLunCapacity,
ciscoExtScsiIntrDiscLunNumber,
ciscoExtScsiIntrDiscLunSerialNum,
ciscoExtScsiIntrDiscLunOs,
ciscoExtScsiLunDiscVsanId,
ciscoExtScsiLunDiscPortId,
ciscoExtScsiLunCacheScsiIndex,
ciscoExtScsiLunCacheDevIndex,
ciscoExtScsiLunCachePortIndex,
ciscoExtScsiLunCacheTgtIndex}STATUSdeprecated
DESCRIPTION"A collection of objects for displaying and
configuring Cisco extension MIB objects to
the CISCO-SCSI-MIB."::={ ciscoExtScsiMIBGroups 5}ciscoExtScsiConfigGroup2 OBJECT-GROUPOBJECTS{ciscoExtScsiDiskGrpId,
ciscoExtScsiLineCardOrSup,
ciscoExtScsiLunDiscSpinLock,
ciscoExtScsiLunDiscOs,
ciscoExtScsiStartLunDisc,
ciscoExtScsiLunDiscStatus,
ciscoExtScsiLunDiscCompleteTime,
ciscoExtScsiIntrDiscTgtVsanId,
ciscoExtScsiIntrDiscTgtDevType,
ciscoExtScsiIntrDiscTgtVendorId,
ciscoExtScsiIntrDiscTgtProductId,
ciscoExtScsiIntrDiscTgtRevLevel,
ciscoExtScsiIntrDiscTgtOtherInfo,
ciscoExtScsiIntrDiscLunCapacity,
ciscoExtScsiIntrDiscLunNumber,
ciscoExtScsiIntrDiscLunSerialNum,
ciscoExtScsiIntrDiscLunOs,
ciscoExtScsiIntrDiscLunPortId,
ciscoExtScsiLunDiscVsanId,
ciscoExtScsiLunDiscPortId,
ciscoExtScsiLunCacheScsiIndex,
ciscoExtScsiLunCacheDevIndex,
ciscoExtScsiLunCachePortIndex,
ciscoExtScsiLunCacheTgtIndex,
ciscoExtScsiDiscType}STATUScurrentDESCRIPTION"A collection of objects for displaying and
configuring Cisco extension MIB objects to
the CISCO-SCSI-MIB."::={ ciscoExtScsiMIBGroups 6}END